ArcadeNanoColourEnglish

From BlinkenArea Wiki
Revision as of 15:41, 27 December 2021 by ArneRossius (talk | contribs) (Created page with "__NOEDITSECTION__ {{InfoboxEnglish |Name=ArcadeNanoColour |Bild=ANC.jpg |Jahr=2019 |Pixel=520 |Farben=512 |Leuchtmittel=SMD LEDs (1x1 mm); |Leistung=? W |Kontakt=User...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
project overview
Zur deutschsprachigen Version dieser Seite
ANC.jpg
Year 2019
Number of pixels 520
Grayscales / Colors 512
Illuminant SMD LEDs (1x1 mm);
Power input ? W
Contact person Arne Rossius
Project website

ArcadeNano Colour is the colour version of ArcadeNano. It is powered through a Mini-USB jack. Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter.

Features

  • 26x20 = 520 pixels, aspect ratio 1:2
  • MicroSD card
    • Supports SD and SDHC
    • File systems: FAT16 and FAT32
    • File formats: BIN, BLM, BML, BBM
  • MCUF stream through a virtual serial port via USB (CH340C)
    • 115200 Baud (max. xx fps)
    • Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream)
  • Power supply:
    • USB (5V), max. ??? mA

Hardware

Software

This project uses the BlinkenPlus firmware.

Fotos

More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm.