ArcadeNanoColourEnglish

project overview
Year	2019
Number of pixels	520
Grayscales / Colors	512
Illuminant	SMD LEDs (1x1 mm)
Power input	? W
Contact person	Arne Rossius
Project website

ArcadeNano Colour is the colour version of ArcadeNano. It is powered through a Mini-USB jack.

Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter. An external 5 V supply can be connected to the "Ext" solder pads on the bottom of the circuit board. The on/off switch then switches between USB and "Ext" supply.

Features

• 26x20 = 520 pixels, aspect ratio 1:2
• MicroSD card
  • Supports SD and SDHC
  • File systems: FAT16 and FAT32
  • File formats: BIN, BLM, BML, BBM
• MCUF stream through a virtual serial port via USB (CH340C)
  • 115200 Baud (max. 7.3 fps)
  • Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream)
• Power supply:
  • USB (5V), max. ??? mA

Hardware

• Schematic Rev. 1 (PNG-Grafik)
• PCB layout Rev. 1 (Gerber files)
• Construction kit instructions Rev. 1.0 for PCB Rev. 1.0

Software

This project uses the BlinkenPlus firmware.

Fotos

More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm.