ArcadeNanoColourEnglish: Difference between revisions
From BlinkenArea Wiki
ArneRossius (talk | contribs) No edit summary |
ArneRossius (talk | contribs) No edit summary |
||
| Line 7: | Line 7: | ||
|Farben=512 | |Farben=512 | ||
|Leuchtmittel=SMD LEDs (1x1 mm) | |Leuchtmittel=SMD LEDs (1x1 mm) | ||
|Leistung= | |Leistung=1.5 W | ||
|Kontakt=[[User:ArneRossius|Arne Rossius]] | |Kontakt=[[User:ArneRossius|Arne Rossius]] | ||
|Webseite= | |Webseite= | ||
| Line 27: | Line 27: | ||
** Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream) | ** Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream) | ||
* Power supply: | * Power supply: | ||
** USB (5V), max. | ** USB (5V), max. 300 mA (not including SD card) | ||
== Hardware == | == Hardware == | ||
Revision as of 14:41, 17 January 2025
project overview  | |
| |
| Year | 2019 |
| Number of pixels | 520 |
| Grayscales / Colors | 512 |
| Illuminant | SMD LEDs (1x1 mm) |
| Power input | 1.5 W |
| Contact person | Arne Rossius |
| Project website | |
ArcadeNano Colour is the colour version of ArcadeNano. It is powered through a Mini-USB jack.
Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter. An external 5 V supply can be connected to the "Ext" solder pads on the bottom of the circuit board. The on/off switch then switches between USB and "Ext" supply.
Features
- 26x20 = 520 pixels, aspect ratio 1:2
- MicroSD card
- MCUF stream through a virtual serial port via USB (CH340C)
- 115200 Baud (max. 7.3 fps)
- Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream)
- Power supply:
- USB (5V), max. 300 mA (not including SD card)
Hardware
- Schematic Rev. 1 (PNG-Grafik)
- PCB layout Rev. 1 (Gerber files) - 4 copper layers with blind vias, includes stencil data (GTP/GBP)
- Construction kit instructions Rev. 1.0 for PCB Rev. 1.0
Software
This project uses the BlinkenPlus firmware.
Photos
More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm.
