ArcadeNanoColourEnglish: Difference between revisions
From BlinkenArea Wiki
ArneRossius (talk | contribs) (Created page with "__NOEDITSECTION__ {{InfoboxEnglish |Name=ArcadeNanoColour |Bild=ANC.jpg |Jahr=2019 |Pixel=520 |Farben=512 |Leuchtmittel=SMD LEDs (1x1 mm); |Leistung=? W |Kontakt=User...") |
ArneRossius (talk | contribs) No edit summary |
||
| Line 6: | Line 6: | ||
|Pixel=520 | |Pixel=520 | ||
|Farben=512 | |Farben=512 | ||
|Leuchtmittel=SMD LEDs (1x1 mm) | |Leuchtmittel=SMD LEDs (1x1 mm) | ||
|Leistung=? W | |Leistung=? W | ||
|Kontakt=[[User:ArneRossius|Arne Rossius]] | |Kontakt=[[User:ArneRossius|Arne Rossius]] | ||
Revision as of 13:41, 27 December 2021
project overview  | |
| |
| Year | 2019 |
| Number of pixels | 520 |
| Grayscales / Colors | 512 |
| Illuminant | SMD LEDs (1x1 mm) |
| Power input | ? W |
| Contact person | Arne Rossius |
| Project website | |
ArcadeNano Colour is the colour version of ArcadeNano. It is powered through a Mini-USB jack. Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter.
Features
- 26x20 = 520 pixels, aspect ratio 1:2
- MicroSD card
- MCUF stream through a virtual serial port via USB (CH340C)
- 115200 Baud (max. xx fps)
- Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream)
- Power supply:
- USB (5V), max. ??? mA
Hardware
- Schematic Rev. 1 (PNG-Grafik)
- PCB layout Rev. 1 (Gerber files)
- Construction kit instructions Rev. 1.0 for PCB Rev. 1.0
Software
This project uses the BlinkenPlus firmware.
Fotos
More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm.
