ArcadeNanoColourEnglish: Difference between revisions
From BlinkenArea Wiki
ArneRossius (talk | contribs) (Created page with "__NOEDITSECTION__ {{InfoboxEnglish |Name=ArcadeNanoColour |Bild=ANC.jpg |Jahr=2019 |Pixel=520 |Farben=512 |Leuchtmittel=SMD LEDs (1x1 mm); |Leistung=? W |Kontakt=User...") |
ArneRossius (talk | contribs) No edit summary |
||
(6 intermediate revisions by the same user not shown) | |||
Line 6: | Line 6: | ||
|Pixel=520 | |Pixel=520 | ||
|Farben=512 | |Farben=512 | ||
|Leuchtmittel=SMD LEDs (1x1 mm) | |Leuchtmittel=SMD LEDs (1x1 mm) | ||
|Leistung=? W | |Leistung=? W | ||
|Kontakt=[[User:ArneRossius|Arne Rossius]] | |Kontakt=[[User:ArneRossius|Arne Rossius]] | ||
Line 12: | Line 12: | ||
}} | }} | ||
'''ArcadeNano Colour''' is the colour version of [[ArcadeNanoEnglish|ArcadeNano]]. It is powered through a Mini-USB jack. Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter. | '''ArcadeNano Colour''' is the colour version of [[ArcadeNanoEnglish|ArcadeNano]]. It is powered through a Mini-USB jack. | ||
Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter. An external 5 V supply can be connected to the "Ext" solder pads on the bottom of the circuit board. The on/off switch then switches between USB and "Ext" supply. | |||
== Features == | == Features == | ||
Line 20: | Line 22: | ||
** Supports SD and SDHC | ** Supports SD and SDHC | ||
** File systems: FAT16 and FAT32 | ** File systems: FAT16 and FAT32 | ||
** File formats: [[BIN]], [[BLM]], [[BML]], [[BBM]] | ** File formats: [[BINEnglish|BIN]], [[BLMEnglish|BLM]], [[BMLEnglish|BML]], [[BBMEnglish|BBM]] | ||
* [[MCUF]] stream through a virtual serial port via USB (CH340C) | * [[MCUFEnglish|MCUF]] stream through a virtual serial port via USB (CH340C) | ||
** 115200 Baud (max. | ** 115200 Baud (max. 7.3 fps) | ||
** Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream) | ** Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream) | ||
* Power supply: | * Power supply: | ||
Line 30: | Line 32: | ||
* [[:Image:ANC_rev1.0_schematic.png|Schematic Rev. 1]] (PNG-Grafik) | * [[:Image:ANC_rev1.0_schematic.png|Schematic Rev. 1]] (PNG-Grafik) | ||
* [[:Media:ANC_rev1.0.zip|PCB layout Rev. 1]] (Gerber files) | * [[:Media:ANC_rev1.0.zip|PCB layout Rev. 1]] (Gerber files) - 4 copper layers with blind vias, includes stencil data (GTP/GBP) | ||
* [[:Media:ANC_rev1.0-instructions.pdf|Construction kit instructions Rev. 1.0]] for PCB Rev. 1.0 | * [[:Media:ANC_rev1.0-instructions.pdf|Construction kit instructions Rev. 1.0]] for PCB Rev. 1.0 | ||
Line 37: | Line 39: | ||
This project uses the [[BlinkenPlusEnglish|BlinkenPlus]] firmware. | This project uses the [[BlinkenPlusEnglish|BlinkenPlus]] firmware. | ||
== | == Photos == | ||
More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm. | More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm. |
Latest revision as of 18:40, 31 March 2024
project overview | |
Year | 2019 |
Number of pixels | 520 |
Grayscales / Colors | 512 |
Illuminant | SMD LEDs (1x1 mm) |
Power input | ? W |
Contact person | Arne Rossius |
Project website |
ArcadeNano Colour is the colour version of ArcadeNano. It is powered through a Mini-USB jack.
Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter. An external 5 V supply can be connected to the "Ext" solder pads on the bottom of the circuit board. The on/off switch then switches between USB and "Ext" supply.
Features
- 26x20 = 520 pixels, aspect ratio 1:2
- MicroSD card
- MCUF stream through a virtual serial port via USB (CH340C)
- 115200 Baud (max. 7.3 fps)
- Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream)
- Power supply:
- USB (5V), max. ??? mA
Hardware
- Schematic Rev. 1 (PNG-Grafik)
- PCB layout Rev. 1 (Gerber files) - 4 copper layers with blind vias, includes stencil data (GTP/GBP)
- Construction kit instructions Rev. 1.0 for PCB Rev. 1.0
Software
This project uses the BlinkenPlus firmware.
Photos
More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm.