ArcadeNanoColourEnglish: Difference between revisions
From BlinkenArea Wiki
ArneRossius (talk | contribs) No edit summary |
ArneRossius (talk | contribs) No edit summary |
||
| Line 22: | Line 22: | ||
** File formats: [[BIN]], [[BLM]], [[BML]], [[BBM]] | ** File formats: [[BIN]], [[BLM]], [[BML]], [[BBM]] | ||
* [[MCUF]] stream through a virtual serial port via USB (CH340C) | * [[MCUF]] stream through a virtual serial port via USB (CH340C) | ||
** 115200 Baud (max. | ** 115200 Baud (max. 7.3 fps) | ||
** Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream) | ** Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream) | ||
* Power supply: | * Power supply: | ||
Revision as of 13:42, 27 December 2021
project overview  | |
| |
| Year | 2019 |
| Number of pixels | 520 |
| Grayscales / Colors | 512 |
| Illuminant | SMD LEDs (1x1 mm) |
| Power input | ? W |
| Contact person | Arne Rossius |
| Project website | |
ArcadeNano Colour is the colour version of ArcadeNano. It is powered through a Mini-USB jack. Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter.
Features
- 26x20 = 520 pixels, aspect ratio 1:2
- MicroSD card
- MCUF stream through a virtual serial port via USB (CH340C)
- 115200 Baud (max. 7.3 fps)
- Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream)
- Power supply:
- USB (5V), max. ??? mA
Hardware
- Schematic Rev. 1 (PNG-Grafik)
- PCB layout Rev. 1 (Gerber files)
- Construction kit instructions Rev. 1.0 for PCB Rev. 1.0
Software
This project uses the BlinkenPlus firmware.
Fotos
More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm.
