AntiKippenLights-AtmelEnglish

project overview
Year	2009
Number of pixels	18
Grayscales / Colors	grayscales
Illuminant	red LEDs
Power input
Contact person	Arne Rossius
Project website

The AKL-Atmel is an AntiKippenLights with an Atmel AVR controller instead of the PIC. The circuitry and the firmare are identical to the AntiKippenLights-Mini, but the AKL-Atmel uses bigger through-hole components instead of the AKL-Mini's SMD components.

Current Revision

• Schematic (Rev. 2), PNG image
• Schematic (Rev. 2.2), Eagle 4.x file
• PCB layout (Rev. 2.2), Eagle 4.x file
• Firmware: see AntiKippenLights-Mini.
• Kit instructions (Rev. 1.6(a)) for heart for PCB Rev. 2.2
• Kit instructions (Rev. 1.6(b)) for heart for PCB Rev. 2.2 and battery holders with fixed wires.
• Kit instructions (Rev. 1.0) for arrow for PCB Rev. 2.2.

Old Revisions

• Kit instructions (Rev. 1.4) for PCB Rev. 2.1
• Kit instructions (Rev. 1.5(a)) for PCB Rev. 2.2
• Kit instructions (Rev. 1.5(b)) for PCB Rev. 2.2 and battery holders with fixed wires.

Photos

http://arne.blinkenarea.org/AKL-Atmel/