LedShapesEnglish: Difference between revisions

From BlinkenArea Wiki
Jump to: navigation, search
No edit summary
No edit summary
Line 72: Line 72:
== Photos ==
== Photos ==


http://arne.blinkenarea.org/LED%20Shapes/
https://arne.blinkenarea.org/LED%20Shapes/gallery.htm


[[Category:Projects]]
[[Category:Projects]]

Revision as of 21:27, 30 September 2023

project overview
Zur deutschsprachigen Version dieser Seite
[[Image:|294px]]
Year 2019-2023
Number of pixels 18-20
Grayscales / Colors greyscales
Illuminant SMD LEDs
Power input
Contact person Arne Rossius
Project website

The LED Shapes are various shapes (currently a heart, an arrow, and a star are available) defined by several LEDs forming their outline. They are the successor of the AntiKippenLights project, now using a smaller 8-pin microcontroller and Charlieplexing to control the up to 20 LEDs forming the shape. As before, several animations with and without fading are played on the LEDs in succession. Power is supplied by a CR2032 3 V lithium button cell. The circuit can be switched on and off with a button, and also turns of by itself after approx. 2 hours.

Prototypes

Star

The first prototype built was for the star shape, using an ATtiny13 microcontroller. It uses THT components except for the LEDs to enable it being built on a home-etched single layer PCB. After successful testing, an SMD-only PCB was designed and became available as LED-Star v3.0.

Arrow

The second prototype built was an arrow using 20 LEDs, this time using a low-cost Padauk microcontroller. It is using only THT components, the microcontroller is mounted on an adapter PCB to fit into a standard IC socket. The prototype PCB is compatible with at least the PMS150C and PFS154 controllers, the latter being used during development as it has reprogrammable flash memory.

Heart

The third prototype built was the traditional heart shape copied from AKL-Mini, but also using the Padauk microcontroller. A single-sided PCB was designed for easier home etching, requiring several wire bridges on the reverse and also using a THT battery holder.

Hardware

The heart and arrow PCBs kept their 45.7 x 30.5 mm dimensions from AKL-Mini, to fit into a matchbox. They both use 18 LEDs as before. The star PCB is itself star-shaped and has 20 LEDs arranged around its edge. The layout is double sided and it's recommendable to use thin PCB material (e.g. 1 mm).

Rev. 4.0

Heart

Arrow

Star

Rev. 3.0 (Star only)

Software

For Hardware Rev. 4.x

For use with Padauk PMS150C or PFS154 controllers.

  • Coming soon.

For Hardware Rev. 3.x

For use with Atmel/Microchip ATtiny13(A) controllers. Only available for 20 LEDs.

Photos

https://arne.blinkenarea.org/LED%20Shapes/gallery.htm