ArcadeMicroEnglish: Difference between revisions
From BlinkenArea Wiki
ArneRossius (talk | contribs) mNo edit summary |
ArneRossius (talk | contribs) No edit summary |
||
| Line 31: | Line 31: | ||
* [[:Media:Arcademicro_rev1.sch|Schematic Rev. 1]] (Eagle 4.x) | * [[:Media:Arcademicro_rev1.sch|Schematic Rev. 1]] (Eagle 4.x) | ||
* [[:Media:Arcademicro_rev1.brd|PCB Layout Rev. 1]] (Eagle 4.x) | * [[:Media:Arcademicro_rev1.brd|PCB Layout Rev. 1]] (Eagle 4.x) | ||
* [[:Media:Arcademicro_rev1.1.brd|PCB Layout Rev. 1.1]] (Eagle 4.x, only silkscreen changes) | |||
* [[:Media:Arcademicro-rev1-instructions.pdf|Kit Instructions Rev. 1]] | * [[:Media:Arcademicro-rev1-instructions.pdf|Kit Instructions Rev. 1]] | ||
* [[:Media:Arcademicro-rev1.1-instructions.pdf|Kit Instructions Rev. 1.1]] | |||
== Software == | == Software == | ||
Revision as of 02:00, 28 December 2015
project overview  | |
| |
| Year | 2011 |
| Number of pixels | 520 |
| Grayscales / Colors | 8 grayscales |
| Illuminant | SMD LEDs |
| Power input | 5 W |
| Contact person | Arne Rossius |
| Project website | |
ArcadeMicro is a very small replica of the BlinkenLights ARCADE project.
Features
- 26x20 = 520 pixels, aspect ratio 1:2
- SD card
- MCUF stream via RS232
- 115200 baud (max. 20 fps)
- stream output for all displayed frames (no matter whether they come from the microcontroller's flash memory, the SD card or an incoming stream)
- power supply: 5V, max. 1A
Hardware
- Schematic Rev. 1 (PNG-Grafik)
- Schematic Rev. 1 (Eagle 4.x)
- PCB Layout Rev. 1 (Eagle 4.x)
- PCB Layout Rev. 1.1 (Eagle 4.x, only silkscreen changes)
- Kit Instructions Rev. 1
- Kit Instructions Rev. 1.1
Software
This project uses the BlinkenPlus firmware.
Photos
More photos available at http://arne.blinkenarea.org/arcademicro/gallery.htm.
