ArcadeMicroEnglish: Difference between revisions
From BlinkenArea Wiki
ArneRossius (talk | contribs) No edit summary |
ArneRossius (talk | contribs) No edit summary |
||
| Line 32: | Line 32: | ||
* [[:File:Arcademicro_rev1.brd|PCB Layout Rev. 1]] (Eagle 4.x) | * [[:File:Arcademicro_rev1.brd|PCB Layout Rev. 1]] (Eagle 4.x) | ||
== Software | == Software == | ||
This project uses the [[BlinkenPlusEnglish|BlinkenPlus]] firmware. | This project uses the [[BlinkenPlusEnglish|BlinkenPlus]] firmware. | ||
Revision as of 20:09, 27 December 2011
project overview  | |
| [[Image:|294px]] | |
| Year | 2011 |
| Number of pixels | 520 |
| Grayscales / Colors | 8 Graustufen |
| Illuminant | SMD LEDs |
| Power input | 5 W |
| Contact person | Arne Rossius |
| Project website | |
ArcadeMicro is a very small replica of the [BlinkenLights ARCADE] project.
Features
- 26x20 = 520 pixels, aspect ratio 1:2
- SD card
- MCUF stream via RS232
- 115200 baud (max. 20 fps)
- stream output for all displayed frames (no matter whether they come from the microcontroller's flash memory, the SD card or an incoming stream)
- power supply: 5V, max. 1A
Hardware
- Schematic Rev. 1 (PNG-Grafik)
- Schematic Rev. 1 (Eagle 4.x)
- PCB Layout Rev. 1 (Eagle 4.x)
Software
This project uses the BlinkenPlus firmware.
