DotBloxEnglish: Difference between revisions

From BlinkenArea Wiki
Jump to: navigation, search
No edit summary
No edit summary
Line 13: Line 13:


more coming soon ...
more coming soon ...
==Hardware==


* Schematic: [[:Image:Dotblox64d.sch|DotBlox64d]]
* Schematic: [[:Image:Dotblox64d.sch|DotBlox64d]]
* Software: [[:Image:Dotblox64d_first_demo.zip|Demo Software]] (display test only, no communication between modules)
 
* First example with communication: [[:Image:Laufschrift-day1.zip|HAR Text Scroller]], Master is the rightmost module.
==Software==
 
===Demonstration===
 
Simple diagonal scroller to check if everything is working. No communication between modules, very simple.
* [[:Image:Dotblox64d_first_demo.zip|Demo Software]]
 
===Text Scroller===
 
* First (old!) version: [[:Image:Laufschrift-day1.zip|HAR Text Scroller]], Master is the rightmost module.
* Second version: [[:Image:Laufschrift-day2.zip|Text Scroller]]. Jumper the middle two pins on the "R" (right) connector of the rightmost module! To change the message, it is enough to re-program the rightmost module's controller.
 
===Firmware in C===


We are also working on a C version of the firmware, see [[Image:Dotblox64v001.c]]
We are also working on a C version of the firmware, see [[Image:Dotblox64v001.c]]
==Photos==


[[Image:P7140018.jpg|Foto: two DotBlox modules|256px]]
[[Image:P7140018.jpg|Foto: two DotBlox modules|256px]]


[[Category:Projekte]]
[[Category:Projekte]]

Revision as of 23:12, 14 August 2009

project overview
Zur deutschsprachigen Version dieser Seite
Nopic.png
Year 2009
Number of pixels 64
Grayscales / Colors 2
Illuminant 5mm LEDs
Power input 3.25 W
Contact person Arne Rossius
Project website
Zur deutschsprachigen Version dieser Seite

back to summary

more coming soon ...

Hardware

Software

Demonstration

Simple diagonal scroller to check if everything is working. No communication between modules, very simple.

Text Scroller

  • First (old!) version: HAR Text Scroller, Master is the rightmost module.
  • Second version: Text Scroller. Jumper the middle two pins on the "R" (right) connector of the rightmost module! To change the message, it is enough to re-program the rightmost module's controller.

Firmware in C

We are also working on a C version of the firmware, see File:Dotblox64v001.c

Photos

Foto: two DotBlox modules