BlinkenXMMSEnglish

From BlinkenArea Wiki
Revision as of 19:20, 23 May 2012 by StefanSchuermans (talk | contribs) (Created page with "__NOEDITSECTION__ {{Infobox-sw-de |Name=BlinkenXMMS |Jahr= 2007 |Kontakt= Dirk Pannenbecker |Webseite= http://s23.org/wiki/BlinkenXMMS }} {{FlagDE|ta...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
zurück zur Übersicht
English Version of this Page
BlinkenXMMS
Jahr 2007
Architektur
Betriebssystem
Hardware-Anforderungen
Software-Anforderungen
Quelltextgröße
Speicherbedarf
Programmiersprache
Lizenz
Kontaktperson Dirk Pannenbecker
Sonstiges

Template:FlagDE back to list

blinking to D&B music

The blinken_xmms is a spectrum analyzer plugin for the multimedia player XMMS. It sends UDP packets to a configurable IP address in EBLP containing 8x18 pixels. The output can be redirected using lldrv to a BlinkenLEDsPro, for example.

The source code for the XMMS plugin has been created with the help of Workshop: Vis-Plugins in XMMS and XMMS Plugin tutorial at nobugs.org. Further, the information about EBLP were helpful. The computational kernel for the visualization is taken from the [1] plugins.

Now with grayscales and config GUI!

Installation

Download

blinkenxmms.tar.bz2

Compilation

gcc -Wall --shared `xmms-config --cflags` -o Blinken_XMMS.so Blinken_XMMS.c
install Blinken_XMMS.so `xmms-config --visualization-plugin-dir`

The development packet of XMMS is needed.

Settings

Konfigurations GUI

Right-click on the XMMS window in menu Visualization-->Visualization-Plugins and select BlinkenXMMS.

Klick on the configuration button and set destination IP and the port. For outputting the UDP stream to a Blink project, you can use:

./BlinkenOutput -l 2323 -d /dev/lldrv