ArcadeNanoEnglish: Difference between revisions

From BlinkenArea Wiki
Jump to: navigation, search
No edit summary
No edit summary
Line 32: Line 32:
* [[:Image:Arcadenano_rev1.0_schematic.png|Schematic Rev. 1]] (PNG image)
* [[:Image:Arcadenano_rev1.0_schematic.png|Schematic Rev. 1]] (PNG image)
* [[:Media:Arcadenano_rev1.0.zip|PCB layout Rev. 1]] (Gerber files)
* [[:Media:Arcadenano_rev1.0.zip|PCB layout Rev. 1]] (Gerber files)
* [[:Media:Arcadenano_rev1.0-instructions.pdf|Construction kit instructions Rev. 1.0]] for PBC Rev. 1.0
* [[:Media:Arcadenano_rev1.0-instructions.pdf|Construction kit instructions Rev. 1.0]] for PCB Rev. 1.0


== Software ==
== Software ==

Revision as of 13:41, 27 December 2021

project overview
Zur deutschsprachigen Version dieser Seite
Arcadenano-project-image.jpg
Year 2017
Number of pixels 520
Grayscales / Colors 8 grayscales
Illuminant 0603 SMD LEDs
Power input 0.7 W
Contact person Arne Rossius
Project website

ArcadeNano is a small clone of the BlinkenLights ARCADE project the size of a small TicTac box.

Features

  • 26x20 = 520 pixels, aspect ratio 1:2
  • MicroSD card
    • Supports SD and SDHC
    • File systems: FAT16 and FAT32
    • File formats: BIN, BLM, BML, BBM
  • MCUF stream through a virtual serial port via USB (CH340G)
    • 115200 Baud (max. 20 fps)
    • Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream)
  • Power supply:
    • Lithium-Polymer rechargable battery
    • USB (5V), max. 300 mA incl. battery charging current

Hardware

Software

This project uses the BlinkenPlus firmware.

Photos

More photos at http://arne.blinkenarea.org/arcadenano/gallery.htm.