ArcadeNanoColourEnglish: Difference between revisions

From BlinkenArea Wiki
Jump to: navigation, search
(Created page with "__NOEDITSECTION__ {{InfoboxEnglish |Name=ArcadeNanoColour |Bild=ANC.jpg |Jahr=2019 |Pixel=520 |Farben=512 |Leuchtmittel=SMD LEDs (1x1 mm); |Leistung=? W |Kontakt=User...")
 
No edit summary
 
(6 intermediate revisions by the same user not shown)
Line 6: Line 6:
|Pixel=520
|Pixel=520
|Farben=512
|Farben=512
|Leuchtmittel=SMD LEDs (1x1 mm);
|Leuchtmittel=SMD LEDs (1x1 mm)
|Leistung=? W
|Leistung=? W
|Kontakt=[[User:ArneRossius|Arne Rossius]]
|Kontakt=[[User:ArneRossius|Arne Rossius]]
Line 12: Line 12:
}}
}}


'''ArcadeNano Colour''' is the colour version of [[ArcadeNanoEnglish|ArcadeNano]]. It is powered through a Mini-USB jack. Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter.
'''ArcadeNano Colour''' is the colour version of [[ArcadeNanoEnglish|ArcadeNano]]. It is powered through a Mini-USB jack.
 
Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter. An external 5 V supply can be connected to the "Ext" solder pads on the bottom of the circuit board. The on/off switch then switches between USB and "Ext" supply.


== Features ==
== Features ==
Line 20: Line 22:
** Supports SD and SDHC
** Supports SD and SDHC
** File systems: FAT16 and FAT32
** File systems: FAT16 and FAT32
** File formats: [[BIN]], [[BLM]], [[BML]], [[BBM]]
** File formats: [[BINEnglish|BIN]], [[BLMEnglish|BLM]], [[BMLEnglish|BML]], [[BBMEnglish|BBM]]
* [[MCUF]] stream through a virtual serial port via USB (CH340C)
* [[MCUFEnglish|MCUF]] stream through a virtual serial port via USB (CH340C)
** 115200 Baud (max. xx fps)
** 115200 Baud (max. 7.3 fps)
** Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream)
** Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream)
* Power supply:
* Power supply:
Line 30: Line 32:


* [[:Image:ANC_rev1.0_schematic.png|Schematic Rev. 1]] (PNG-Grafik)
* [[:Image:ANC_rev1.0_schematic.png|Schematic Rev. 1]] (PNG-Grafik)
* [[:Media:ANC_rev1.0.zip|PCB layout Rev. 1]] (Gerber files)
* [[:Media:ANC_rev1.0.zip|PCB layout Rev. 1]] (Gerber files) - 4 copper layers with blind vias, includes stencil data (GTP/GBP)
* [[:Media:ANC_rev1.0-instructions.pdf|Construction kit instructions Rev. 1.0]] for PCB Rev. 1.0
* [[:Media:ANC_rev1.0-instructions.pdf|Construction kit instructions Rev. 1.0]] for PCB Rev. 1.0


Line 37: Line 39:
This project uses the [[BlinkenPlusEnglish|BlinkenPlus]] firmware.
This project uses the [[BlinkenPlusEnglish|BlinkenPlus]] firmware.


== Fotos ==
== Photos ==


More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm.
More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm.

Latest revision as of 18:40, 31 March 2024

project overview
Zur deutschsprachigen Version dieser Seite
ANC.jpg
Year 2019
Number of pixels 520
Grayscales / Colors 512
Illuminant SMD LEDs (1x1 mm)
Power input ? W
Contact person Arne Rossius
Project website

ArcadeNano Colour is the colour version of ArcadeNano. It is powered through a Mini-USB jack.

Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter. An external 5 V supply can be connected to the "Ext" solder pads on the bottom of the circuit board. The on/off switch then switches between USB and "Ext" supply.

Features

  • 26x20 = 520 pixels, aspect ratio 1:2
  • MicroSD card
    • Supports SD and SDHC
    • File systems: FAT16 and FAT32
    • File formats: BIN, BLM, BML, BBM
  • MCUF stream through a virtual serial port via USB (CH340C)
    • 115200 Baud (max. 7.3 fps)
    • Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream)
  • Power supply:
    • USB (5V), max. ??? mA

Hardware

Software

This project uses the BlinkenPlus firmware.

Photos

More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm.