ArcadeNanoColourEnglish: Difference between revisions

From BlinkenArea Wiki
Jump to: navigation, search
No edit summary
No edit summary
Line 32: Line 32:


* [[:Image:ANC_rev1.0_schematic.png|Schematic Rev. 1]] (PNG-Grafik)
* [[:Image:ANC_rev1.0_schematic.png|Schematic Rev. 1]] (PNG-Grafik)
* [[:Media:ANC_rev1.0.zip|PCB layout Rev. 1]] (Gerber files)
* [[:Media:ANC_rev1.0.zip|PCB layout Rev. 1]] (Gerber files) - 4 copper layers with blind vias
* [[:Media:ANC_rev1.0-instructions.pdf|Construction kit instructions Rev. 1.0]] for PCB Rev. 1.0
* [[:Media:ANC_rev1.0-instructions.pdf|Construction kit instructions Rev. 1.0]] for PCB Rev. 1.0



Revision as of 14:34, 27 December 2021

project overview
Zur deutschsprachigen Version dieser Seite
ANC.jpg
Year 2019
Number of pixels 520
Grayscales / Colors 512
Illuminant SMD LEDs (1x1 mm)
Power input ? W
Contact person Arne Rossius
Project website

ArcadeNano Colour is the colour version of ArcadeNano. It is powered through a Mini-USB jack.

Unlike the monochrome version, there is no lighium polymer battery as the circuit requires exactly 5 V due to the RGB LEDs, and there was no space left on the circuit board for a voltage converter. An external 5 V supply can be connected to the "Ext" solder pads on the bottom of the circuit board. The on/off switch then switches between USB and "Ext" supply.

Features

  • 26x20 = 520 pixels, aspect ratio 1:2
  • MicroSD card
    • Supports SD and SDHC
    • File systems: FAT16 and FAT32
    • File formats: BIN, BLM, BML, BBM
  • MCUF stream through a virtual serial port via USB (CH340C)
    • 115200 Baud (max. 7.3 fps)
    • Stream output for all displayed frames (from microcontroller flash memory, SD card or incoming stream)
  • Power supply:
    • USB (5V), max. ??? mA

Hardware

Software

This project uses the BlinkenPlus firmware.

Fotos

More photos at http://arne.blinkenarea.org/ArcadeNano%20Colour/gallery.htm.