ArcadeMicroEnglish: Difference between revisions

From BlinkenArea Wiki
Jump to: navigation, search
mNo edit summary
No edit summary
Line 31: Line 31:
* [[:Media:Arcademicro_rev1.sch|Schematic Rev. 1]] (Eagle 4.x)
* [[:Media:Arcademicro_rev1.sch|Schematic Rev. 1]] (Eagle 4.x)
* [[:Media:Arcademicro_rev1.brd|PCB Layout Rev. 1]] (Eagle 4.x)
* [[:Media:Arcademicro_rev1.brd|PCB Layout Rev. 1]] (Eagle 4.x)
* [[:Media:Arcademicro_rev1.1.brd|PCB Layout Rev. 1.1]] (Eagle 4.x, only silkscreen changes)
* [[:Media:Arcademicro-rev1-instructions.pdf|Kit Instructions Rev. 1]]
* [[:Media:Arcademicro-rev1-instructions.pdf|Kit Instructions Rev. 1]]
* [[:Media:Arcademicro-rev1.1-instructions.pdf|Kit Instructions Rev. 1.1]]


== Software ==
== Software ==

Revision as of 02:00, 28 December 2015

project overview
Zur deutschsprachigen Version dieser Seite
Arcademicro-project-image.jpg
Year 2011
Number of pixels 520
Grayscales / Colors 8 grayscales
Illuminant SMD LEDs
Power input 5 W
Contact person Arne Rossius
Project website

ArcadeMicro is a very small replica of the BlinkenLights ARCADE project.

Features

  • 26x20 = 520 pixels, aspect ratio 1:2
  • SD card
    • supports SD and SDHC
    • file systems: FAT16 and FAT32
    • file formats: BIN, BLM, BML
  • MCUF stream via RS232
    • 115200 baud (max. 20 fps)
    • stream output for all displayed frames (no matter whether they come from the microcontroller's flash memory, the SD card or an incoming stream)
  • power supply: 5V, max. 1A

Hardware

Software

This project uses the BlinkenPlus firmware.

Photos

More photos available at http://arne.blinkenarea.org/arcademicro/gallery.htm.