ArcadeMicroEnglish: Difference between revisions

Revision as of 20:09, 27 December 2011

ArcadeMicro is a very small replica of the [BlinkenLights ARCADE] project.

26x20 = 520 pixels, aspect ratio 1:2
SD card
- supports SD and SDHC
- file systems: FAT16 and FAT32
- file formats: BIN, BLM, BML
MCUF stream via RS232
- 115200 baud (max. 20 fps)
- stream output for all displayed frames (no matter whether they come from the microcontroller's flash memory, the SD card or an incoming stream)
power supply: 5V, max. 1A

== Software

This project uses the BlinkenPlus firmware.

@@ Line 1: / Line 1: @@
-TODO
+__NOEDITSECTION__
+{{InfoboxEnglish
+|Name=ArcadeMicro
+|Bild=
+|Jahr=2011
+|Pixel=520
+|Farben=8 Graustufen
+|Leuchtmittel=SMD LEDs
+|Leistung=5 W
+|Kontakt=[[User:ArneRossius|Arne Rossius]]
+|Webseite=
+}}
+ArcadeMicro is a very small replica of the [[http://blinkenlights.net/arcade BlinkenLights ARCADE]] project.
+== Features ==
+* 26x20 = 520 pixels, aspect ratio 1:2
+* SD card
+** supports SD and SDHC
+** file systems: FAT16 and FAT32
+** file formats: [[BIN]], [[BLM]], [[BML]]
+* [[MCUF]] stream via RS232
+** 115200 baud (max. 20 fps)
+** stream output for all displayed frames (no matter whether they come from the microcontroller's flash memory, the SD card or an incoming stream)
+* power supply: 5V, max. 1A
+== Hardware ==
+* [[:Image:Arcademicro_rev1_schematic.png|Schematic Rev. 1]] (PNG-Grafik)
+* [[:File:Arcademicro_rev1.sch|Schematic Rev. 1]] (Eagle 4.x)
+* [[:File:Arcademicro_rev1.brd|PCB Layout Rev. 1]] (Eagle 4.x)
+== Software
+This project uses the [[BlinkenPlusEnglish|BlinkenPlus]] firmware.