AntiKippenLights-AtmelEnglish: Difference between revisions

From BlinkenArea Wiki
Jump to: navigation, search
No edit summary
No edit summary
Line 12: Line 12:
}}
}}


The AKL-Atmel is an [[AntiKippenLightsEnglish|AntiKippenLights]] with an Atmel AVR controller instead of the PIC (for schematic and firmware, see [[AntiKippenLights-MiniEnglish|AntiKippenLights-Mini]]).
The AKL-Atmel is an [[AntiKippenLightsEnglish|AntiKippenLights]] with an Atmel AVR controller instead of the PIC. The circuitry and the firmare are identical to the [[AntiKippenLights-MiniEnglish|AntiKippenLights-Mini]], but the AKL-Atmel uses bigger through-hole components instead of the AKL-Mini's SMD components.
 
* [[:Image:Akl-atmel-rev2.png|Schematic (Rev. 2)]], PNG image
* [[:Media:Akl-atmel.sch|Schematic (Rev. 2)]], Eagle 4.x file
* [[:Media:Akl-atmel.brd|PCB layout (Rev. 2)]], Eagle 4.x file
* Firmware: see [[AntiKippenLights-MiniEnglish|AntiKippenLights-Mini]].
* [[:Media:Akl-atmel-rev1.2-instructions.pdf|Kit instructions (Rev. 1.2)]]


[[Category:Projects]]
[[Category:Projects]]

Revision as of 03:03, 19 January 2013

project overview
Zur deutschsprachigen Version dieser Seite
Akl-atmel-project-image.jpg
Year 2009
Number of pixels 18
Grayscales / Colors grayscales
Illuminant red LEDs
Power input
Contact person Arne Rossius
Project website

The AKL-Atmel is an AntiKippenLights with an Atmel AVR controller instead of the PIC. The circuitry and the firmare are identical to the AntiKippenLights-Mini, but the AKL-Atmel uses bigger through-hole components instead of the AKL-Mini's SMD components.