BlinkenToolsFAQEnglish

Blinken Tools FAQ

This page has been created as a collection of links and pointers to tools useful for working/playing with LED displays.

Documentation of File Formats and Network Protocols

  * Documentation of Movie File Formats
     * FileFormats
     * The BML and BBM format are the "best" protocols. BML is XML-based and BBM is binary and faster.

  * Documentation of Blinken Network Protocols
     * Protocols
     * The MCUF protocol is the "best" protocol.
     * The MCUF protocol is also used on serial ports by simply writing the payload of the UDP packets to the serial port. Serial port settings are usually 115200,N,8,1 or 57600,N,8,1.

Creating Blinken Movies

  * Movie Editor
     * Blimp http://stefan.blinkenarea.org/Blimp/Blimp.jar

     * Source Code: https://git.blinkenarea.org/?p=Blimp
        * requires BlinkenLibJava https://git.blinkenarea.org/?p=BlinkenLibJava
        * requires JFlexiPix https://git.blinkenarea.org/?p=JFlexiPix

Converting Blinken Movies

  * Library and command line tools for Blinken Movies and protocols
     * all tools output a short help when called without arguments
     * Source Code: http://git.blinkenarea.org/?p=BlinkenLib
        * please install libgif-dev and libmng-dev packages before compiling

  * Convert between different movie formats / GIF / MNG
     * BlinkenConv -i input.bml -o output.bbm
     * BlinkenConv -i input.gif -o output.bbm
     * BlinkenConv -i input.bbm -o output.mng
  * Generate test movie "dots" 18 x 8 pixels, 256 grayscale levels
     * BlinkenConv -t 18x8-1/256 dots 100 -o test.bbm
  * Generate test movie "lines" 18 x 8 pixels, 24 bit RGB
     * BlinkenConv -t 18x8-3/256 lines 100 -o test.bbm

Network and Device Output

  * Send Blinken Movie to 127.0.0.1:2323 via network
     * BlinkenSend -d 127.0.0.1:2323 -i test.bbm

  * Receive a Blinken Movie stream from network and output it on serial port
     * BlinkenOutput -l 127.0.0.1:2323 -d /dev/ttyUSB0 -s 115200,N,8,1

  * Output Blinken Movie to serial port
     * BlinkenDeviceOutput -d /dev/ttyUSB0 -s 115200,N,8,1 -i test.bbm

  * Output from Blimp to network
     * start Blimp
     * select "Output", "MCUF" from menu and enter destination IP:port

  * Output from Blimp to serial port (experimental)
     * configure serial settings of serial port
        * e.g. "stty -F /dev/ttyUSB0 cs8 -parenb -cstopb"
     * start Blimp
     * select "Output", "MCUF file/device" from menu and enter serial device, e.g. "/dev/ttyUSB0" (Linux) or "COM42" (Windows)

Converting Video Files to Blinken Movies

  * convert part of a video file to MNG file
     * what it does:
        * crop out rectangle of width 100, height 200 with top-left corner at 150,0
        * scale cropped part to width 25, height 50 (must be same aspect-ratio as cropped part)
        * output as MNG
     * compile MPlayer from source with libmng-dev package installed for MNG support
     * mplayer -vf crop=100:200:150:0,scale=25:50 -vo mng:output=test.mng test.mp4
     * optional: use BlinkenConv to convert MNG to Blinken Movie

  * play MNG file with MPlayer
  * compile MPlayer from source with libmng-dev package installed for MNG support
  * mplayer -demuxer mng input.mng