AKL-Mini SpezialEnglish: Difference between revisions
ArneRossius (talk | contribs) No edit summary |
ArneRossius (talk | contribs) No edit summary |
||
| Line 31: | Line 31: | ||
=== Main Controller (ATtiny2313) === | === Main Controller (ATtiny2313) === | ||
See [[AKL-MiniEnglish# | See [[AKL-MiniEnglish#Software|AKL-Mini Software]] | ||
=== Melody Controller (ATtiny11) === | === Melody Controller (ATtiny11) === | ||
| Line 39: | Line 39: | ||
The firmware supports two melodies, selectable with an input pin. The pin is read every time before the melody starts playing, so if its state is changed during playback, the controller will finish playing the melody before switching to the other one. | The firmware supports two melodies, selectable with an input pin. The pin is read every time before the melody starts playing, so if its state is changed during playback, the controller will finish playing the melody before switching to the other one. | ||
* [[:Media:melody_aklms-1.5.zip|Melody player]] (default melodies: Mendelssohn's Wedding March and Happy Birthday) | |||
[[Category:Projects]] | [[Category:Projects]] | ||
Revision as of 14:24, 5 August 2017
project overview  | |
| |
| Year | 2017 |
| Number of pixels | 18 |
| Grayscales / Colors | greyscales |
| Illuminant | SMD LEDs |
| Power input | |
| Contact person | Arne Rossius |
| Project website | |
AntiKippenLights-Mini Spezial (or AKL-Mini Spezial for short) is a regular AntiKippenLights-Mini extended with a second microcontroller to play a melody through a piezo speaker while the main controller is turned on. When the main controller is switched off, the melody keeps playing until its end is reached.
Hardware
In addition to the hardware of the AKL-Mini, the AKL-Mini Spezial uses an ATtiny11 controller to play the melody, an external resistor and capacitor to set the speed (as the ATtiny11's internal oscillator frequency is highly dependent on supply voltage) and a piezo speaker. An output pin on the main controller (ATtiny2313) is connected to an input on the ATtiny11 to send the "enable" signal.
The PCB is the same size as the AKL-Mini (45.7 x 30.5 mm, to fit a matchbox), but the LED heart has been extended and the LEDs rotated to match the heart shape. This provides plenty of space inside the heart to write a message (e.g. the names of a newlywed couple) or paste a heart-shaped photo.
Rev. 1.5
- Schematic (PNG image)
- Schematic (EAGLE 4.x)
- PCB layout (EAGLE 4.x)
- Construction kit instructions
Software
Main Controller (ATtiny2313)
Melody Controller (ATtiny11)
The ATtiny11 does not support ISP programming and must be programmed with an AVR programmer capable of high-voltage (12V) serial programming. If it is already soldered to the PCB, it must be desoldered before it can be programmed.
The firmware supports two melodies, selectable with an input pin. The pin is read every time before the melody starts playing, so if its state is changed during playback, the controller will finish playing the melody before switching to the other one.
- Melody player (default melodies: Mendelssohn's Wedding March and Happy Birthday)
